Lacp Port Setting - D-Link DGS-3324SRi User Manual

LACP Port Setting

The LACP Port Settings window is used in conjunction with the Link Aggregation window to cre ate port trunking
groups on the Switch. Using the following window, the user may set which ports will be active and passive in processing
and sending LACP control frames.
Figure 6- 12. LACP Port Setting and LACP Port Information window
The user may set the following parameters:
Parameter
Unit
xStack Stackable Gigabit Layer 3 Switch Manual
Description
Choose the switch in the switch stack to be configured by using the pull-down
menu.
63