Mstp Port Information - D-Link DGS-3324SRi User Manual

Click Apply to implement changes made.
To configure the parameters for a previously set MSTI, click on its hyperlinked MSTI ID number, which will reveal the
following screen for configuration.
The user may configure the following parameters for a MSTI on the Switch.
Parameter
MSTI ID
Type
VID List (1-4094)
Click Apply to implement changes made.

MSTP Port Information

This window displays the current MSTI configuration settings and can be used to update the port configuration for an
MSTI ID. If a loop occurs, the MSTP function will use the port priority to select an interface to put into the forwarding
state. Set a higher priority value for interfaces to be selected for forwarding first. In instances where the priority value is
identical, the MSTP function will implement the lowest port number into the forwarding state and other interfaces will be
blocked. Remember that lower priority values mean higher priorities for forwarding packets.
To view the following window, click Configuration > Spanning Tree > MSTI Port Information:
xStack Stackable Gigabit Layer 3 Switch Manual
Figure 6- 25. Instance ID Settings window - Modify
Description
Displays the MSTI ID previously set by the user.
This field allows the user to choose a desired method for altering the MSTI settings.
The user has 2 choices.
Add VID - Select this parameter to add VIDs to the MSTI ID, in conjunction
with the VID List parameter.
Remove VID - Select this parameter to remove VIDs from the MSTI ID, in
conjunction with the VID List parameter.
This field is used to specify the VID range from configured VLANs set on the Switch
that the user wishes to add to this MSTI ID. Supported VIDs on the Switch range from
ID number 1 to 4094. This parameter can only be utilized if the Type chosen is Add or
Remove.
76