Fs Commands; Format - D-Link DGS-3324SRi User Manual

Enter a path name chosen by the user, into the File Name field in the window above, and click Start to initiate the file
transfer. The following window should appear, notifying the user of the current transfer status and completion of the
upload.

FS Commands

The windows of this section are used for formatting and changing the settings for the CompactFlash card located at the
back of the Switch. These commands relate only to the CompactFlash card and cannot be used for the Switch's internal
memory. Therefore, it will only be used with the DGS-3324SRi member of the xStack family.

Format

The following window is used to format the CompactFlash card. To view this window, click Maintenance > CF Services
> FS Command > Format.
This window offers the following fields to aid the user in formatting the CompactFlash card.
Parameter
Drive ID
FS Type
Option
xStack Stackable Gigabit Layer 3 Switch Manual
Figure 10- 16. Upload Log to CF window
Figure 10- 17. Save Log to CF window
Figure 10- 18. Format CF Card Settings window
Description
Allows the user to specify the drive on the CF card to be formatted. For this release,
only c: drive can be set or specified.
Allows the user to choose the type of File System to be formatted. For this release,
only a FAT16 file system can be used for formatting.
Choose the type of formatting to be done.
fast denotes formatting just the file architecture of the storage media
291