D-Link DGS-3324SRi User Manual page 216

xStack Stackable Gigabit Layer 3 Switch Manual
Figure 7- 8. Authentication Server Group window
This screen displays the Authentication Server Groups on the Switch. The Switch has four built-in Authentication Server
Groups that cannot be removed but can be modified. To modify a partic ular group, click its hyperlinked Group Name,
which will then display the following window.
Figure 7- 9. Add a Server Host to Server Group (XTACACS) window.
To add an Authentication Server Host to the list, enter its IP address in the IP Address field, choose the protocol associated
with the IP address of the Authentication Server Host and click Add to Group to add this Authentication Server Host to
the group.
To add a server group other than the ones listed, click the add button, revealing the following window to configure.
Figure 7- 10. Authentication Server Group Table Add Settings window
Enter a group name of up to 15 characters into the Group Name field and click Apply. The entry should appear in the
Authentication Server Group Settings window, as shown in Figure 7-8 (Trinity).
214