Snmp Engine Id - D-Link DGS-3324SRi User Manual

SNMP Version
Community String or
SNMP V3 User Name
To implement your new settings, click Apply. To return to the SNMP Host Table, click the
Entries link.

SNMP Engine ID

The Engine ID is a unique identifier used for SNMP V3 implementations. This is an alphanumeric string used to identify
the SNMP engine on the Switch.
To display the Switch's SNMP Engine ID, open the SNMP Manger folder and click on the SNMP Engine ID link. This
will open the SNMP Engine ID Configuration window, as shown below.
To change the Engine ID, type the new Engine ID in the space provided and click the Apply button.
xStack Stackable Gigabit Layer 3 Switch Manual
V1 - To specifies that SNMP version 1 will be used.
V2 - To specify that SNMP version 2 will be used.
V3-NoAuth-NoPriv - To specify that the SNMP version 3 will be used, with a
NoAuth-NoPriv security level.
V3-Auth-NoPriv - To specify that the SNMP version 3 will be used, with an Auth-
NoPriv security level.
V3-Auth-Priv - To specify that the SNMP version 3 will be used, with an Auth-Priv
security level.
Type in the community string or SNMP V3 user name as appropriate.
Figure 7- 30. SNMP Engine ID Configuration window
239
Show All SNMP Host Table