Reauthenticate Port(S) For Port Based 802.1X - D-Link DGS-3324SRi User Manual

Reauthenticate Port(s) for Port Based 802.1x

This window allows you to reauthenticate a port or group of ports by choosing a port or group of ports by using the pull
down menus From and To and clicking Apply. The Reauthenticate Port Table displays the current status of the
reauthenticated port(s) once you have clicked Apply.
Click Configuration > Port Access Entity > PAE System Control > Reauthenticate Port(s) to open the
Reauthenticate Port(s) window:
Figure 6- 90. Reauthenticate Port and Reauthenticate Port Table window
This window displays the following information:
Parameter
Unit
Port
MAC Address
Auth PAE State
BackendState
PortStatus
xStack Stackable Gigabit Layer 3 Switch Manual
Description
Choose the Switch ID number of the Switch in the switch stack to be modified.
The port number of the reauthenticated port.
Displays the physical address of the Switch where the port resides.
The Authenticator State will display one of the following: Initialize, Disconnected,
Connecting, Authenticating, Authenticated, Aborting, Held, ForceAuth, ForceUnauth,
and N/A.
The Backend State will display one of the following: Request, Response, Success, Fail,
Timeout, Idle, Initialize, and N/A.
The status of the controlled port can be Authorized, Unauthorized, or N/A.
150