Cpu Utilization - D-Link DGS-3324SRi User Manual

To select a port to view these statistics for, first select the Switch in the switch stack by using the Unit pull-down menu and
then select the port by using the Port pull down menu. The user may also use the real-time graphic of the Switch and/or
switch stack at the top of the web page by simply clicking on a port. The following field can be set:
Parameter
Time Interval
Record Number
Click Clear to refresh the graph. Click Apply to implement changes made.

CPU Utilization

The CPU Utilization displays the percentage of the CPU being used, expressed as an integer percentage and calculated as
a simple average by time interval. To view the CPU Utilization window, open the Monitoring folder and click the CPU
Utilization link.
To select a port to view these statistics for, first select the Switch in the switch stack by using the Unit pull-down menu. To
view the CPU utilization by port, use the real-time graphic of the Switch and/or switch stack at the top of the web page by
simply clicking on a port. Click Apply to implement the configured settings. The window will automatically refresh with
new updated statistics.
The information is described as follows:
Parameter
Time Interval [1s ]
xStack Stackable Gigabit Layer 3 Switch Manual
Description
Select the desired setting between 1s and 60s, where "s" stands for seconds. The
default value is one second.
Select number of times the Switch will be polled between 20 and 200. The default
value is 200.
Figure 9- 2. CPU Utilization graph
Description
Select the desired setting between 1s and 60s, where "s" stands for seconds. The
default value is one second.
241