Label
Click Start to initiate the formatting of the CompactFlash drive.
Copy
This window is used to copy a directory located within the CompactFlash drive. To view this window, click Maintenance
> CF Services > FS Command > Copy.
This window offers the following fields to aid the user in copying files located in the CompactFlash card.
Parameter
Source File (Full Path)
Target File (Full Path)
Click Start to initiate copying the file.
Md/Mkdir
The following window is used to make a new directory on the CompactFlash card. To view this window, click
Maintenance > CF Services > FS Command > Md/Mkdir. To accomplish this, enter a new path and filename into the
space provided and click the Apply button.
Rd/Rmdir
The following window is used to delete a file located on the CompactFlash Card. To view this window, click Maintenance
> CF Services > FS Command > Rd/Rmdir.
xStack Stackable Gigabit Layer 3 Switch Manual
accessory.
full denotes a full format.
full_with_MBR – Denotes that a f u ll format will occur and all sectors of the
card will be cleared, including the Master Boot Record.
No information will remain on the storage media accessory after a full format.
Enter a previously set name associated with this storage media accessory.
Figure 10- 19. Copy File window
Description
Enter the full path and file name of the directory to be copied. This entry cannot
exceed 64 characters in length.
Enter the file name of the directory and the path to place the copy. This entry cannot
exceed 64 characters in length.
Figure 10- 20. Make a new Directory window
Figure 10- 21. Remove a Directory window
292