D-Link DGS-3324SRi User Manual page 238

To add a new entry to the Switch's SNMP Group Table, click the Add button in the upper left-hand corner of the SNMP
Group Table page. This will open the SNMP Group Table Configuration page, as shown below.
The following parameters can set:
Parameter
Group Name
Read View Name
Write View Name
Notify View Name
Security Model
xStack Stackable Gigabit Layer 3 Switch Manual
Figure 8- 7. SNMP Group Table Display – View window
Figure 8- 8. SNMP Group Table Configuration – Add window
Description
Type an alphanumeric string of up to 32 characters. This is used to identify the new
SNMP group of SNMP users.
This name is used to specify the SNMP group created can request SNMP mes -
sages.
Specify a SNMP group name for users that are allowed SNMP write privileges to
the Switch's SNMP agent.
Specify a SNMP group name for users that can receive SNMP trap messages
generated by the Switch's SNMP agent.
SNMPv1 - Specifies that SNMP version 1 will be used.
SNMPv2 - Specifies that SNMP version 2c will be used. The SNMPv2 supports both
centralized and
improvements in the Structure of Management Information (SMI) and adds some
security features.
distributed network
236
management strategies. It includes