Password Protection - D-Link DGS-3324SRi User Manual

Press Enter in both the Username and Password fields. You will be given access to the command prompt DGS -3324SRi:4#,
DGS-3324SR:4#, DXS-3326GSR:4# or DXS-3350SR:4# as shown below:
There is no initial username or password. Leave the Username and Password fields blank.

Password Protection

The xStack family of switches does not have a default user name and password. One of the first tasks when settings up the
Switch is to create user accounts. If you log in using a predefined administrator-level user name, you have privileged
access to the Switch's management software.
xStack Stackable Gigabit Layer 3 Switch Manual
Figure 4- 2. Initial screen, first time connecting to the Switch
Figure 4- 3. Command Prompt
NOTE: The first user automatically gets Administrator level privileges. It is
recommended to create at least one Admin-level user account for the
Switch.
39