Cx-Designer Functions And Screens - Omron NS-CXDC1-V3 User Manual

User Interface
3-3-2

CX-Designer Functions and Screens

Symbol Table
The Output Tab Page displays the CX-Designer operating status and error
information.
The Found Results Tab Page displays the search and replace results.
Click an item to display and select the corresponding object.
The Data Check Results Tab Page displays the data check results.
Click an item to display and select the corresponding object.
A symbol table lists the symbols registered to the project.
The CX-Designer can specify symbols as the data to be accessed by func-
tional objects, in addition to directly specifying PLC or other host addresses or
internal memory.
"Symbol" is a name to which an address is allocated. This symbol can be
used instead of the address in the CX-Designer. This allows addresses to be
changed simply by changing the address set for the symbol, instead of open-
ing each screen and changing the property settings for the functional objects
on that screen. In addition, comments can be specified for symbols in the CX-
Designer.
The Symbol Table Window can be displayed and hidden by selecting View -
Window - Symbol Table from the menu bar.
Click Name to
change the
display order
between
descending and
ascending (the
sort function).
Click to display a
pull-down list and
display only the
desired type (the
filter function).
Section 3-3
37