Omron FQ User Manual page 45

2
Using the top section as a pivot point, pull down the
filter so that it attaches to the Sensor.
Adjusting the Colors of the Image (White Balance)
If external lighting is used, the image may appear as having different colors than the actual object. If this is the
case, adjust the white balance.
If the lighting built in to the Sensor is used, the white balance is already adjusted. No setting is required in this
case.
[Image] − [Camera setup]
1
Input a picture of white paper or cloth.
2
Press [ ] – [White balance] on the right side of the
display.
3
Press the [Auto] Button. The Sensor will automatical-
ly adjust the colors.
4
Move the bar to the left (light) or right (dark) to fine-
tune the colors.
5
Press [OK].
FQ User's Manual Adjusting Image Quality
41