Monitoring The Signal I/O Status - Omron FQ User Manual

7-3 Monitoring the Signal I/O Status

You can check if the I/O connections are working normally.
[In/Out] − [I/O monitor] − [I/O Monitor]
1
The I/O status of the external devices will be dis-
played.
2
Press the [OK] Button to return to the [I/O monitor]
Display.
FQ User's Manual
Input Signals (TRIG and IN0 to IN5)
Signals that are displayed in red are
currently being input from the
external devices to the Sensor.
Output Signals
(OUT0, OUT1, and OUT2)
Signals that are displayed in red are
currently being output from the Sensor
to the external devices.
You can turn the signals ON and OFF
by pressing them to test the outputs.

Monitoring the Signal I/O Status

97