Menu Tables - Omron FQ User Manual

10-1 Menu Tables

Image Tab Page
Menu command
Focus
Brightness
HDR
White balance
Partial input
Lighting control
Trigger delay
Position compensation
(Standard Models Only)
Teach
Model region
Insp. region
Judgement
Inspect Tab Page
Menu command
Add item
Modify
Delete
Copy
Rename
136

Menu Tables

Description
The value shown here is used as a ref-
erence when adjusting the focus with
the focus adjustment screw.
Adjusts the brightness of the image.
Suppresses reflections and differences
in brightness.
Corrects differences in coloring
between the image and the actual
object.
Used to make the image input range
smaller.
Turns the light in the Sensor ON and
OFF.
Adjusts the time until the Camera shut-
ter opens after the trigger signal is
received.
Adjusts the position of the measure-
ment object before measurement.
Performs teaching and sets the judge-
ment parameters.
Description
Used to add, modify, delete, copy, or
change the name of an inspection item.
Setting range
---
AUTO or 1 to 100
OFF (default) or 1 to 4
• AUTO
• R: 0.001 to 7.999
• G: 0.001 to 7.999
• B: 0.001 to 7.999
752 × 8 to 752 × 480
ON (default) or OFF
0 to 163 ms (default: 0)
ON or OFF (default)
---
Correlation: 0 to 100
(Defaults: Upper limit: 100, Lower limit: 60)
Setting range
Search, Edge Position, Edge Width, Area,
Color Data
---
15 alphanumeric characters
Data Refer-
ence
--- p. 37
Scene p. 38
Scene p. 39
Scene p. 41
Scene p. 76
Scene p. 111
System p. 45
Scene p. 42
p. 44
Data Refer-
ence
--- p. 50
--- p. 51
--- p. 51
---
---
FQ User's Manual