Omron E5AN User Manual page 329

Parameters Characters
o1-t
Linear Current Out-
put
ev-m
Multi-SP Use
ev-1
Event Input Assign-
ment 1
ev-2
Event Input Assign-
ment 2
sqr
Extraction of Square
Root Enable
amov
Move to Advanced
function Setting
Level
Note (1) Set "None" as the unit for analog inputs (23: 0 to 50 mV).
(2)
Transfer output
Set Point
Set Point During SP
Ramp
PV
MV Monitor (Heat-
ing)
MV Monitor (Cool-
ing)
(2.1) Initialized when the transfer output type is changed.
Initialized if the input type, temperature unit, scaling upper/lower limit, or SP upper/
lower limit is changed when the transfer output type is SP, ramp SP, or PV.
(When initialized by the initializing settings, it is initialized to 100.0/0.0.)
(3) PRST (Program Start) can be set even when the Program Pattern parameter is set to OFF, but the
function will be disabled.
Setting (monitor) value
4-20: 4 to 20 mA
0-20: 0 to 20 mA
0 to 2
None: None
STOP: RUN/STOP
MANU: Auto/Manual
PRST: Program Start (See
note 3.)
DRS: Invert Direct/Reverse
Operation
AT-2: 100% AT Execute/Can-
cel
AT-1: 40% AT Execute/Cancel
WTPT: Setting Change
Enable/Disable
LAT: Alarm Latch Cancel
None: None
STOP: RUN/STOP
MANU: Auto/Manual
PRST: Program Start (See
note 3.)
DRS: Invert Direct/Reverse
Operation
AT-2: 100% AT Execute/Can-
cel
AT-1: 40% AT Execute/Cancel
WTPT: Setting Change
Enable/Disable
LAT: Alarm Latch Cancel
OFF, ON
1999 to 9,999
Setting (monitor) range
type
SP lower limit to SP upper limit
SP lower limit to SP upper limit
Temperature: Input setting
range lower limit to input setting
range upper limit
Analog: Scaling lower limit to
scaling upper limit
Standard: 5.0 to 105.0
Heating/cooling: 0.0 to 105.0
0.0 to 105.0
Display Default
4-20, 0-20 4-20
1
none
NONE
stop
manu
prst
drs
at-2
at-1
wtpt
lat
none
STOP
stop
manu
prst
drs
at-2
at-1
wtpt
lat
off,
OFF
on
0
Default (transfer output
upper/lower limits)
(See note 2.1.)
SP upper limit/lower limit
SP upper limit/lower limit
Input setting range upper/
lower limit
Scaling upper/lower limit
100.0/0.0
100.0/0.0
Appendix
Unit Set value
None
None
None
None
None
None
Unit
EU
EU
EU
EU
%
%
293