Omron E5AN User Manual page 121

Setting the No. 3 Display
Operating Procedure
Operation Level
PV/SP
25
C
100
Initial Setting Level
Input Type
in-t
5
Initial Setting Level
Move to
amov
Advanced
Function Setting
-169
Level
Advanced Function Setting Level
Parameter
init
Initialization
off
Advanced Function Setting Level
PV/SP Display
spdp
Screen Selection
4
spdp
2
Initial Setting Level
Input Type
in-t
5
Operation Level
PV/SP
C
25
100
50.0
Operation Level
PV/SP
C
25
100
sp0
This procedure displays PV/SP/MV and PV/SP/Multi-SP on the Process
Value/Set Point display. The PV/SP Display Screen Selection parameter is set
to 2.
1. Press the O Key for at least three seconds to move from the operation
level to the initial setting level.
2. Press the M Key to select the Move to Advanced Function Setting Level
parameter.
3. Use the D Key to enter the password (" 169").
It is possible to move to the advanced function setting level by either
pressing the M Key or waiting two seconds without pressing any key.
4. Press the M Key to select the PV/SP Display Screen Selection parame-
ter.
5. Use the U and D Keys to set 2.
6. Press the O Key for at least one second to move from the advanced
function setting level to the initial setting level.
7. Press the O Key for at least one second to move from the initial setting
level to the operation level.
The MV will be displayed on the No. 3 display.
8. Press the M Key to confirm that the Multi-SP is displayed on the No. 3
display.
Section 3-11
85