Table 11 Network > Wireless Lan: Wpa/Wpa2 - ZyXEL Communications NBG-510S User Manual

Chapter 7 Wireless LAN
The following table describes the labels in this screen.
Table 11 Network > Wireless LAN: WPA/WPA2
LABEL
WPA Compatible
Authentication Server
IP Address
Port Number
Shared Secret
Accounting Server
Active
IP Address
Port Number
Shared Secret
Apply
Cancel
68
DESCRIPTION
This check box is available only when you select WPA2-PSK or WPA2 in the
Server Type field.
Select the check box to have both WPA2 and WPA wireless clients be able to
communicate with the ZyXEL Device even when the ZyXEL Device is using
WPA2-PSK or WPA2.
Enter the IP address of the external authentication server in dotted decimal
notation.
Enter the port number of the external authentication server. The default port
number is 1812.
You need not change this value unless your network administrator instructs you
to do so with additional information.
Enter a password (up to 64 alphanumeric characters) as the key to be shared
between the external authentication server and the ZyXEL Device.
The key must be the same on the external authentication server and your ZyXEL
Device. The key is not sent over the network.
Select this option to enable user accounting through an external authentication
server.
Enter the IP address of the external accounting server in dotted decimal notation.
Enter the port number of the external accounting server. The default port number
is 1813.
You need not change this value unless your network administrator instructs you
to do so with additional information.
Enter a password (up to 31 alphanumeric characters) as the key to be shared
between the external accounting server and the ZyXEL Device.
The key must be the same on the external accounting server and your ZyXEL
Device. The key is not sent over the network.
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
NBG-510S User's Guide