C
H A P T E R
This chapter describes the LAN screen you use to configure the LAN IP address on the
ZyXEL Device.
9.1 LAN Overview
Local Area Network (LAN) is a shared communication system to which many computers are
attached. The LAN screens can help you configure a LAN DHCP server, manage IP addresses,
and partition your physical network into logical networks.
9.1.1 Factory LAN Defaults
The LAN parameters of the ZyXEL Device are preset in the factory with an IP address of
192.168.1.1 and a subnet mask of 255.255.255.0 (24 bits)
These parameters should work for the majority of installations.
9.2 LAN Screen
Click Network > LAN to configure the LAN interface settings.
Figure 54 Network > LAN
The following table describes the labels in this screen.
Table 17 Network > LAN
LABEL
IP Address
Subnet Mask
Apply
Cancel
NBG-510S User's Guide
DESCRIPTION
Enter an IP address for the LAN interface in dotted decimal notation. For
example, 192.168.1.1.
Enter the subnet mask for the IP address above. For example. 255.255.255.0.
Click Apply to save the settings.
Click Cancel to begin configuring this screen afresh.
9
LAN
77