Zyxel Device Access And Login - ZyXEL Communications NBG-510S User Manual

802.11g wireless remote access broadband gateway
Hide thumbs Also See for NBG-510S:
Table of Contents

Advertisement

Chapter 26 Troubleshooting

26.2 ZyXEL Device Access and Login

I forgot the IP address for the ZyXEL Device.
1 The default IP address is 192.168.1.1.
2 Use the console port to log in to the ZyXEL Device.
3 If you changed the IP address and have forgotten it, you might get the IP address of the
ZyXEL Device by looking up the IP address of the default gateway for your computer.
To do this in most Windows computers, click Start > Run, enter cmd, and then enter
ipconfig. The IP address of the Default Gateway might be the IP address of the ZyXEL
Device (it depends on the network), so enter this IP address in your Internet browser.
4 If this does not work, you have to reset the device to its factory defaults. See
on page
I forgot the password.
1 The default administrator login password is 1234.
2 If this does not work, you have to reset the device to its factory defaults. See
on page
I cannot see or access the Login screen in the web configurator.
1 Make sure you are using the correct IP address.
• The default IP address is 192.168.1.1.
• If you changed the IP address, use the new IP address.
• If you changed the IP address and have forgotten it, see the troubleshooting
suggestions for
2 Check the hardware connections, and make sure the LEDs are behaving as expected. See
the Quick Start Guide or
3 Make sure you are using a supported web browser and that the web browser does not
block pop-up windows and has JavaScripts and Java enabled.
4 Make sure your computer is in the same subnet as the ZyXEL Device. (If you know that
there are routers between your computer and the ZyXEL Device, skip this step.)
• If there is a DHCP server on your network, make sure your computer is using a
dynamic IP address. Your ZyXEL Device is a DHCP server by default.
• If there is no DHCP server on your network, make sure your computer's IP address is
in the same subnet as the ZyXEL Device.
5 Reset the device to its factory defaults, and try to access the ZyXEL Device with the
default IP address. See
166
41.
41.
I forgot the IP address for the ZyXEL Device.
Section 2.1 on page
Section 3.6 on page
31.
41.
NBG-510S User's Guide
Section 3.6
Section 3.6

Advertisement

Table of Contents
loading

Table of Contents