Figure 62 Network > Nat > Port Triggering > Add/Edit; Table 23 Network > Nat > Port Triggering > Add/Edit - ZyXEL Communications NBG-510S User Manual

Figure 62 Network > NAT > Port Triggering > Add/Edit
The following table describes the labels in this screen.
Table 23 Network > NAT > Port Triggering > Add/Edit
LABEL
Name
Outgoing
(Trigger) Port
Range
Incoming
(Response) Port
Range
Apply
Cancel
NBG-510S User's Guide
DESCRIPTION
Type a unique name (up to 16 alpha-numeric characters) for identification
purposes. Underscores (_) and hyphens (-) are also allowed but other special
characters and spaces are not.
The trigger port range of ports causes (triggers) the ZyXEL Device to record the IP
address of the LAN computer that sent the traffic to a server on the WAN.
Enter the starting and ending port numbers for the range.
This is the range of ports that a server on the WAN uses when it sends out a
service's traffic. The ZyXEL Device forwards incoming traffic with these ports to
the LAN computer that requested the service.
Enter the starting and ending port numbers for the range.
Click Apply to save the settings.
Click Cancel to return to the previous screen and not save your changes.
Chapter 11 NAT and Firewall (WAN to LAN)
87