Ip Static Route Edit; Figure 74 Management > Static Route; Figure 75 Management > Static Route > Edit; Table 32 Management > Static Route - ZyXEL Communications NBG-510S User Manual

Chapter 16 Static Route
Figure 74 Management > Static Route
The following table describes the labels in this screen.
Table 32 Management > Static Route
LABEL
#
Name
Active
Destination
Gateway
Action

16.2.1 IP Static Route Edit

Click a static route's Edit icon to display the following screen. Use this screen to configure the
required information for a static route.
Figure 75 Management > Static Route > Edit
114
DESCRIPTION
This is the number of an individual static route.
This is the name that describes or identifies this route.
This field shows whether this static route is active (Yes) or not (No).
This parameter specifies the IP network address of the final destination. Routing is
always based on network number.
This is the IP address of the gateway. The gateway is a router or switch on the same
network segment as the ZyXEL Device's interface. The gateway helps forward
packets to their destinations.
Click the Edit icon to go to the screen where you can set up a static route on the
ZyXEL Device. No matter which edit icon you click, the entry is added in the first
available row.
Click the Delete icon to remove a static route from the ZyXEL Device. A window
displays asking you to confirm that you want to delete the route.
NBG-510S User's Guide