Restart Screen; Box Access Screen; Figure 88 Maintenance > Tools > Restart; Figure 89 Maintenance > Tools > Box Access - ZyXEL Communications NBG-510S User Manual

Do NOT turn off the ZyXEL Device while it is restarting.
3 After the ZyXEL Device finishes rebooting, the login screen displays (you may need to
refresh your browser to get it to appear). You may need to change the IP address of your
computer to be in the same subnet as that of the default ZyXEL Device LAN IP address
(192.168.1.1).
You can also press the ZyXEL Device's physical RESET button to reset the factory defaults
of your ZyXEL Device. Refer to
button.

19.3 Restart Screen

System restart allows you to reboot the ZyXEL Device without turning the power off.
Click Maintenance > Tools > Restart. Click Restart to have the ZyXEL Device reboot. This
does not affect the ZyXEL Device's configuration.
Figure 88 Maintenance > Tools > Restart

19.4 Box Access Screen

Use this screen to set which services/protocols can access the ZyXEL Device from the WAN
(the Internet). Click Maintenance > Tools > Box Access to open the screen as shown.
Figure 89 Maintenance > Tools > Box Access
NBG-510S User's Guide
Section 3.6 on page 38 for more information on the RESET
Chapter 19 Tools
129