Add Desktop Link Screen; Figure 111 User Portal > Desktop Links > Manage View > Add; Table 56 User Portal > Desktop Links > Manage View > Add - ZyXEL Communications NBG-510S User Manual

24.4 Add Desktop Link Screen

Click the Add or Edit icon in the User Portal > Desktop Links > Manage View screen to
open this screen. Use this screen to create a new or edit an existing server entry.
Figure 111 User Portal > Desktop Links > Manage View > Add
The following table describes the labels in this screen.
Table 56 User Portal > Desktop Links > Manage View > Add
LABEL
Reference Name Specify the name for the link that the portal user can click to connect to the
Protocol
Host IP Address
Intranet Port
Client Port
Apply Changes
Cancel
NBG-510S User's Guide
DESCRIPTION
associated computer.
Select the protocol of the remote desktop server software on the LAN computer to
be managed.
VNC stands for Virtual Network Computing.
RDP stands for Remote Desktop Protocol.
Note: The remote desktop client software on the remote user's
computer must use the same protocol as the remote desktop
server software on the LAN computer.
Type the computer's (static) IP address.
This is the listening port of the LAN computer running the server version of the
remote desktop software. The ZyXEL Device uses this port number to send traffic
to the LAN computer that is being remotely managed.
This is the sending port of the authorized remote computer with the client version of
the remote desktop software installed. The remote computer uses this port number
to communicate with the ZyXEL Device.
If the remote computer is also running server remote desktop software, ensure that
it uses a different port number.
Click Apply Changes to create the entry and return to the previous screen.
Click Cancel to return to the previous screen without saving your changes.
Chapter 24 Secure Remote Desktop Control
153