ZyXEL Communications NBG-510S User Manual page 173

Table 63 Standards Supported (continued)
STANDARD
IEEE 802.11d
IEEE 802.11x
IEEE 802.11e QoS
Microsoft PPTP
Wall-mounting Instructions
Complete the following steps to hang your ZyXEL Device on a wall.
See Table 61 on page 171
place them.
1 Select a high position on a sturdy wall that is free of obstructions.
2 Drill two holes for the screws. The distance between the centers of the holes is listed in
the product specifications appendix.
Be careful to avoid damaging pipes or cables located inside the wall when
drilling holes for the screws.
3 Do not insert the screws all the way into the wall. Leave a small gap of about 0.5 cm
between the heads of the screws and the wall.
4 Make sure the screws are snugly fastened to the wall. They need to hold the weight of
the ZyXEL Device with the connection cables.
5 Align the holes on the back of the ZyXEL Device with the screws on the wall. Hang the
ZyXEL Device on the screws.
NBG-510S User's Guide
DESCRIPTION
Standard for Local and Metropolitan Area Networks: Media Access
Control (MAC) Bridges
Port Based Network Access Control.
IEEE 802.11 e Wireless LAN for Quality of Service
MS PPTP (Microsoft's implementation of Point to Point Tunneling
Protocol)
for the size of screws to use and how far apart to
Appendix A Product Specifications
173