No Security; Figure 45 Network > Wireless Lan: No Security; Table 7 Network > Wireless Lan - ZyXEL Communications NBG-510S User Manual

Chapter 7 Wireless LAN
The following table describes the general wireless LAN labels in this screen.
Table 7 Network > Wireless LAN
LABEL
Enable a
Wireless LAN
Name(SSID)
Hide SSID
Channel
Selection
Operating
Channel
Apply
Cancel
See the rest of this chapter for information on the other labels in this screen.

7.3.1 No Security

Select No Security to allow wireless stations to communicate with the wireless clients without
any data encryption.
If you do not enable any wireless security on your ZyXEL Device, your network
is accessible to any wireless networking device that is within range.
Figure 45 Network > Wireless LAN: No Security
64
DESCRIPTION
Click the check box to activate wireless LAN.
(Service Set IDentity) The SSID identifies the Service Set with which a wireless
station is associated. Wireless stations associating to the access point (AP) must
have the same SSID. Enter a descriptive name (up to 32 printable 7-bit ASCII
characters) for the wireless LAN.
Select this check box to hide the SSID in the outgoing beacon frame so a station
cannot obtain the SSID through scanning using a site survey tool.
The range of radio frequencies used by IEEE 802.1 wireless devices is called a
channel. Select a channel ID that is not already in use by a neighboring device.
Select a channel from the drop-down list box. The options vary depending on
whether you are using A or B/G frequency band and the country you are in.
Select Auto Channel to have the ZyXEL Device automatically find a suitable
channel to use.
This displays the channel the ZyXEL Device is currently using.
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
NBG-510S User's Guide