Dhcp; Chapter 10 Dhcp; Factory Dhcp Defaults; Dhcp Screen - ZyXEL Communications NBG-510S User Manual
802.11g wireless remote access broadband gateway
Hide thumbs
Also See for NBG-510S:
- Quick start manual (103 pages) ,
- Support note (42 pages) ,
- Release note (5 pages)
Table of Contents
Advertisement
C
H A P T E R
This chapter describes the DHCP screen you use to configure the DHCP server on the ZyXEL
Device.
10.1 DHCP
The ZyXEL Device has built-in DHCP server capability that assigns IP addresses and DNS
servers to systems that support DHCP client capability.
10.1.1 Factory DHCP Defaults
The LAN parameters of the ZyXEL Device are preset in the factory with the DHCP server
enabled with 32 client IP addresses starting from 192.168.1.33.
These parameters should work for the majority of installations.
10.2 DHCP Screen
Click Network > DNCP to configure the DHCP server settings.
Figure 55 Network > DHCP > General
NBG-510S User's Guide
10
DHCP
79
Advertisement
Table of Contents
Troubleshooting
