Port Forwarding Add/Edit Screen; Figure 58 Network > Nat > Port Forwarding; Table 20 Nat Application - ZyXEL Communications NBG-510S User Manual

Figure 58 Network > NAT > Port Forwarding
The following table describes the labels in this screen.

Table 20 NAT Application

LABEL
Configuration
Default Host
Settings
Default Host
Apply
Cancel
Port Forwarding
List
Local IP
Remote IP
Incoming Service/
Application
Add icon

11.4 Port Forwarding Add/Edit Screen

Click the Add or Edit icon in the Network > NAT > Port Forwarding screen to open this
screen. Use this screen to configure a port forwarding rule.
NBG-510S User's Guide
DESCRIPTION
In addition to the servers for specified services, NAT supports a default server. A
default server receives packets from ports that are not specified in the port
forwarding list. Enable this option to be able to assign a default host.
If you do not assign a default host, the ZyXEL Device discards all packets
received for ports that are not specified in the port forwarding list or remote
management.
Select a LAN computer from the drop-down list box or select Custom and specify
a LAN IP address.
Click Apply to save the settings.
Click Cancel to begin configuring this screen afresh.
This field displays the host name or IP address of the LAN computer server that
receives the Incoming Service/Application.
This field displays the IP address or domain name of the WAN computer that can
access the LAN computer. All displays if any WAN computer can access the LAN
computer.
This field displays the service that the ZyXEL Device sends to the computer
configured in the Local IP field.
This column provides icons to add, edit, and delete entries.
Click the Add icon to go to the screen where you can configure a new entry.
Click the Edit icon to go to the screen where you can edit the entry.
Click the Delete icon to remove an entry.
Chapter 11 NAT and Firewall (WAN to LAN)
83