Upnp And Zyxel; Configuring Upnp; Installing Upnp In Windows Example; Figure 72 Management > Upnp - ZyXEL Communications NBG-510S User Manual

Chapter 15 UPnP
When a UPnP device joins a network, it announces its presence with a multicast message. For
security reasons, the ZyXEL Device allows multicast messages on the LAN only.
All UPnP-enabled devices may communicate freely with each other without additional
configuration. Disable UPnP if this is not your intention.

15.1.4 UPnP and ZyXEL

ZyXEL has achieved UPnP certification from the Universal Plug and Play Forum UPnP™
Implementers Corp. (UIC). ZyXEL's UPnP implementation supports IGD 1.0 (Internet
Gateway Device).
See the following sections for examples of installing and using UPnP.

15.2 Configuring UPnP

Click Management > UPnP to display the UPnP screen.
Figure 72 Management > UPnP
The following table describes the fields in this screen.
Table 31 Management > UPnP
LABEL
Device Name
Enable the Universal
Plug and Play (UPnP)
Feature
Apply
Cancel

15.3 Installing UPnP in Windows Example

This section shows how to install UPnP in Windows Me and Windows XP.
106
DESCRIPTION
This identifies the ZyXEL device in UPnP applications.
Select this check box to activate UPnP. Be aware that anyone could use a
UPnP application to open the web configurator's login screen without
entering the ZyXEL Device's IP address (although you must still enter the
password to access the web configurator).
Click Apply to save your changes.
Click Cancel to begin configuring this screen afresh.
NBG-510S User's Guide