6.4 Example Parameters
SSID
Channel
Security
802.11 mode
In this chapter, the ZyXEL Device is also referred to as an access point (AP). A computer with
a wireless network card or USB/PCI adapter is referred to here as a "wireless client".
This chapter uses the M-302 utility screens as an example for the wireless client. The screens
may vary for different models.
6.5 Configuring the ZyXEL Device
Follow the steps below to configure the wireless settings on your ZyXEL Device.
1 Open the Network > Wireless LAN screen in the web configurator.
Figure 31 Network > Wireless LAN
2 Make sure the Enable Wireless LAN check box is selected.
3 Enter SSID_Example3 as the SSID and select a channel.
4 Set security mode to WPA-PSK and enter ThisismyWPA-PSKpre-sharedkey in the
Pre-Shared Key field. Click Apply.
5 Open the Status screen. Under Wireless, verify that the wireless Status is Up, the
Name(SSID) is SSID_Example3, and the Encryption is WPA-PSK.
NBG-510S User's Guide
SSID_Example3
6
WPA-PSK
(Pre-Shared Key: ThisismyWPA-PSKpre-sharedkey)
IEEE 802.11b/g
Chapter 6 Tutorials
51