ZyXEL Communications NBG-510S User Manual page 169

To reset the ZyXEL Device,
1 Make sure the PWR LED is on and not blinking.
2 Use a pointed object to press the RESET button in for five seconds and release it.
If the ZyXEL Device restarts automatically, wait for the ZyXEL Device to finish restarting,
and log in to the web configurator. The LAN IP address is 192.168.1.1. The user name is
"admin". The password is "1234".
If the ZyXEL Device does not restart automatically,
Device's power. Then, follow the directions above again.
NBG-510S User's Guide
Chapter 26 Troubleshooting
sconnect and reconnect the ZyXEL
di
169