Mstp Commands - ZyXEL Communications Dimension GS-3012 Cli Reference Manual

C
H A P T E R
Use these commands to configure Multiple Spanning Tree Protocol (MSTP) as defined in
IEEE 802.1s.
37.1 Command Summary
The following section lists the commands for this feature.
Table 85 mstp Command Summary
COMMAND
show mstp
spanning-tree mode <RSTP|MRSTP|MSTP>
mstp
no mstp
mstp configuration-name <name>
mstp revision <0-65535>
mstp hello-time <1-10> maximum-age <6-
40> forward-delay <4-30>
mstp max-hop <1-255>
Table 86 mstp instance Command Summary
COMMAND
show mstp instance <0-16>
no mstp instance <0-16>
mstp instance <0-16> priority <0-
61440>
mstp instance <0-16> vlan <vlan-list>
Ethernet Switch CLI Reference Guide

MSTP Commands

DESCRIPTION
Displays MSTP configuration for the Switch.
Specifies the STP mode you want to implement on
the Switch.
Activates MSTP on the Switch.
Disables MSTP on the Switch.
Sets a name for an MSTP region.
name: 1-32 printable characters
Sets the revision number for this MST Region
configuration.
Sets Hello Time, Maximum Age and Forward Delay.
hello-time: The time interval in seconds between
BPDU (Bridge Protocol Data Units) configuration
message generations by the root switch.
maximum-age: The maximum time (in seconds) the
Switch can wait without receiving a BPDU before
attempting to reconfigure.
forward-delay: The maximum time (in seconds)
the Switch will wait before changing states.
Sets the maximum hop value before BPDUs are
discarded in the MST Region.
DESCRIPTION
Displays MSTP instance configuration.
Disables the specified MST instance on the Switch.
Specifies the bridge priority of the instance.
priority: Must be a multiple of 4096.
Specifies the VLANs that belongs to the instance.
37
M P
E 3
C 13
C 13
C 13
C 13
C 13
C 13
C 13
M P
E 3
C 13
C 13
C 13
127