Ip Source Binding Commands - ZyXEL Communications Dimension GS-3012 Cli Reference Manual

C
H A P T E R

IP Source Binding Commands

Use these commands to manage the bindings table for IP source guard.
27.1 Command Summary
The following section lists the commands for this feature.
Table 70 ip source binding Command Summary
COMMAND
show ip source binding [<mac-
addr>] [...]
show ip source binding help
ip source binding <mac-addr>
vlan <vlan-id> <ip> [interface
port-channel <interface-id>]
no ip source binding <mac-addr>
vlan <vlan-id>
27.2 Command Examples
This example shows the current binding table.
sysname# show ip source binding
MacAddress
-----------------
Total number of bindings: 0
The following table describes the labels in this screen.
Table 71 show ip source binding
LABEL
MacAddress
IpAddress
Lease
Ethernet Switch CLI Reference Guide
DESCRIPTION
Displays the bindings configured on the Switch, optionally
based on the specified parameters.
Provides more information about the specified command.
Creates a static binding for ARP inspection.
Removes the specified static binding.
IpAddress
--------------- ------------
DESCRIPTION
This field displays the source MAC address in the binding.
This field displays the IP address assigned to the MAC address in the
binding.
This field displays how many days, hours, minutes, and seconds the
binding is valid; for example, 2d3h4m5s means the binding is still valid for
2 days, 3 hours, 4 minutes, and 5 seconds. This field displays infinity if the
binding is always valid (for example, a static binding).
27
Lease Type VLAN
-------------
M P
E 3
E 3
C 13
C 13
Port
---- ---
107