Diffserv Commands - ZyXEL Communications Dimension GS-3012 Cli Reference Manual

C
H A P T E R
Use these commands to configure Differentiated Services (DiffServ) on the Switch.
14.1 Command Summary
The following section lists the commands for this feature.
Table 43 diffserv Command Summary
COMMAND
show diffserv
diffserv
no diffserv
diffserv dscp <0-63> priority
<0-7>
interface port-channel <port-
list>
diffserv
no diffserv
Ethernet Switch CLI Reference Guide

DiffServ Commands

DESCRIPTION
Displays general DiffServ settings.
Enables DiffServ on the Switch.
Disables DiffServ on the Switch.
Sets the DSCP-to-IEEE 802.1q mappings.
Enters config-interface mode for the specified port(s).
Enables DiffServ on the port(s).
Disables DiffServ on the port(s).
14
M P
E 3
C 13
C 13
C 13
C 13
C 13
C 13
67