Inddd Display Dump Messages - IBM 3270 Manual

INDDD
INDDD Display Dump Messages
INDDDOOI Only COUNTER, DUMP, or
TRACE are valid parameters
Explanation: You entered an incorrect
parameter. COUNTER, DUMP, or TRACE are
the only valid parameters for the INDDISP
command.
User Response: Choose the appropriate
parameter.
INDDD002 Parameter required. Use
COUNTER,DUMP,orTRACE
Explanation: You did not enter a required
parameter after you typed the INDDISP
command.
User Response: Choose the appropriate
parameter for the INDDISP command.
INDDD003 Diskette or file not found
Explanation: This message appears when you
inserted the incorrect diskette in response to
either messages INDDD004, INDDD005, or
INDDD006.
User Response: None. INDDD004, INDDD005,
or INDDD006 appears.
INDDD004 Insert DUMPDATA.OOx. Press
Enter, or End to quit
Explanation: This message prompts you to
insert the appropriate diskette.
User Response: Insert the requested diskette
and press Enter. If you press the End key, the
display dump utility is ended.
A-14 Book 3 - Using the Control Program