IBM 3270 Manual page 251

INDSY
INDSY003 Component information -
xxxxxxxx
Press any key to continue
Explanation: One of the components has
encountered a recoverable error.
Use_Response: If the error persists, record the
variable data
xxxxxxxx
in the message. Then, go
back to Chapter 13, and continue with question 2
to locate the cause of the failure.
INDSY007 Insert diskette DUMPDATA.OOx
Press any key to continue or
Q
to quit
Explanation: The variable data
x is the diskette
labeled 1, 2, or 3 that you created using
INDPREP.
User Response: Insert the diskette and press
any key to continue the dump process. If you
press
Q
to quit the process, message INDSY013
appears.
INDSY008 Incorrect diskette. Insert
diskette DUMPDATA.OOx
Press any key to continue or Q
to quit
Explanation: You inserted the incorrect
diskette.
User Response: Make sure that the diskette is
blank and formatted. This should be generated
by the INDPREP command. Insert the correct
diskette and press any key to continue the dump
process. If you press Q to quit the process,
message INDSY013 appears.
A-66 Book 3 - Using the Control Program