IBM 3270 Manual page 191

INDCU
INDCU015 Customization incomplete -
system not created
Explanation: You have pressed Esc to quit the
customization program while it was creating a
customized system diskette.
User Response: The system on the diskette is
incomplete and cannot be used. The
customization program re-displays the
customization summary panel with the values
that you selected for your customized system. If
you want to create the same customized system
on the same diskette, press PF3.
INDCU016 Not enough free storage to run
this program
Explanation: You are trying to run the
customization program on a work station with
insufficient storage. A minimum of lOOK bytes of
free storage is required.
User Response: Go back to Chapter 13, and
continue with question 2 to locate the cause of
the failure.
INDCU017 Insert DOS diskette in drive
x
Explanation: You are trying to create a system
on a diskette that has not been formatted. This
message appears along with messages CU031 and
CU032 after you have pressed PF3 from the
customization summary panel to create a
customized system.
User Response: Insert the DOS diskette into the
diskette drive indicated by the message, and
close the drive door. The customization program
formats the system diskette, copies the DOS files
to it, and then creates the customized system.
A-6
Book 3 - Using the Control Program