IBM 3270 Manual page 165

5. Type the name of the recording you want to
play.
For this example, type the name PCCMDS or
whatever name you chose when you were
making this recording.
Press the Enter key when the name is completed.
WSCTRL AUTO PLAY NAME PCCMDS_
6. If you type the wrong name, backspace over
it, and type a new name.
If you decide you do not want to play this
recording, press the WSCtrl key, and you are
back where you started.
7. When you are ready, press the Enter key.
The recording will play on the screen up to
the pause. Your screen should look like this:
A>vol
Volume in drive A has no label
A>time
Current time is 10:11 :05.1 2
Enter new time:
11-14 Book 3 - Using the Control Program