Receiving Osjvs2 Tso Data Sets At Your Personal Computer - IBM 3270 Manual

Receiving OSjVS2 TSO Data Sets
at Your Personal Computer
You can receive a data set or a member of a
partitioned data set from a TSO host at one of
your Personal Computer sessions.
To send a data set to a Personal Computer
session.
1. Jump to the TSO host window you want to
receive the data set from.
2. If the window is not already enlarged, you
can enlarge it.
3. If you are not logged on, log on to your TSO
host.
4.
Make sure that the TSO ready message is the
last thing on your screen:
~
I
READY
5. Jump to one of your PC windows.
6. Make sure that your default drive contains
the 3270 PC Utilities.
If the utilities are on a diskette, either your
system diskette or a separate diskette, insert
it into drive A, and make sure that drive A is
the default.
If the utilities are on your fixed disk, make
sure that drive C is the default.
Sending Files Between a PC and a Host 7-27