IBM 3270 Manual page 158

6. Type the name in the information area.
For this example, type the name PCCMDS.
The information area will look like this:
Press the Enter key when the name is completed.
WSCTRL AUTO REC NAME PCCMDS_
7. If you are not happy with the name,
backspace over it, and type a new name.
If you decide you do not want to make a
recording, press the WSCtrl key, and you are
back where you started.
8. When you are ready, press the Enter key.
If you accidentally used a duplicate name,
simply backspace and type a new name.
Warning:
From this point on, every key you press will
be recorded except for these:
• WSCtrl
• Enlarge
• CrSel
• ChgScr
• Jump
• Finish
• Enter (in notepad windows)
• PF keys (in notepad windows)
9. Type what you want to record.
For example, let's record a series of DOS
commands.
Chapter 11. Recording/Playing/Erasing Keystrokes 11-7