6. Type the name in the information area.
For this example, type the name JMEMO.
The information area will look like this:
Press the Enter key when the name is completed.
WSCTRL
AUTO REC
NAME JMEMO_
7. If you are not happy with the name,
backspace over it, and type a new name.
If you decide you do not want to make a
recording right now, press the WSCtrl key,
and you are back to where you started.
8. When you are ready, press the Enter key.
If you accidentally used a duplicate name,
simply backspace and type a new name.
If the system accepts the name you chose, the
line at the bottom of the screen disappears.
The record symbol appears. It looks like this:
R
Warning:
From this point on, every key you press will
be recorded except for these:
•
WSCtrl
•
Enlarge
•
CrSel
•
ChgScr
•
Jump
•
Finish
Chapter 11. Recording/Playing/Erasing Keystrokes
11-3