Playing A Keystroke Recording - IBM 3270 Manual

Playing a Keystroke Recording
To play a keystroke recording:
1. Use the Jump key to go to the window in
which you want to play the recording.
If you want to work along, jump to a notepad
window, and follow the rest of these
instructions. You will need a recording
called JMEMO. The section, "Making a
Keystroke Recording" on page 11-1, describes
how to make this recording.
You must make room on your screen for the
recording, or it will type over whatever is
already there.
2. Use the Cursor keys to move the cursor to the
place you want the recording to begin
playing.
3. If your work station is not in Control Mode,
press the WSCtrl key.
This line should appear at the bottom of your
screen:
WSCTRL
Chapter 11. Recording/Playing/Erasing Keystrokes 11-11