IBM 3270 Manual page 90

Using the Printer Attached to Your 3270
PC
1. Press the WSCtrl key.
This line appears at the bottom of your
screen.
I
WScrRl
2. Make sure the host window you want to print
is active and enlarged to fill the screen.
If it is not, press the Jump key and then press
the Enlarge key. If you do not enlarge the
window, you will print only what appears in
the window.
3. Press the Print key.
The line at the bottom of your screen changes
to look like this:
I
WSCTRl PRINT SCR
4. Wait for the words PRINT SCR to disappear.
5. Press the WSCtrl key again to return to using
your host session.
If you want to stop the printer before the entire
screen is printed:
• Press the Alt key and the Reset key.
Chapter 8. Printing What's on Your Screen 8-3