IBM 3270 Manual page 138

4. Type the short name of the window you want
to add to this screen profile.
You can add any of the other windows from
screen
o.
The window appears on your screen
as you type its name. If your windows are
full size, the new window will also fill the
screen. The line at the bottom shows the
short name of the window that you just
added. For example, if you added window D:
WSCTRL
WINDOW=D SCREEN=2
5. When you have added the window you want,
you can move it around and change its size.
See the section "Changing the Size and
Location of the Windows on Your Screen" on
page 9-3, in this chapter and follow those
instructions.
6. When you are ready, press the WSCtrl key to
go back to your work.
You are done.
Chapter 9. Rearranging the Windows 9-41