IBM 3270 Manual page 62

• Sending a PC file from a drive other than
your default to replace a file on your CMS
B-disk.
send a:pcfiie.txt e:cmsfiJ.e script bl
(ascii crif)
This command sends a PC file named
PCFILE.TXT from a diskette in drive A to
your CMS B-disk in your host window named
E. It replaces a SCRIPT file named
CMSFILE.
If you do not have a file called CMSFILE
SCRIPT on your B-disk, PCFILE will be
added to your B-disk as a new file called
CMSFILE SCRIPT. The records in the file
may vary in length up to a maximum of 80
characters.
• Sending a file from your default drive and
adding it to the end of a file on your CMS
A-disk.
send c:pcfiie.txt cmsfiie script al
(ascii crif append)
This command sends a PC file named
PCFILE. TXT from your fixed disk to your
only VM host. You do not need to name the
host window if you have only one. It adds the
file to the end of a SCRIPT file named
CMSFILE on your CMS A-disk.
• Sending a file from a subdirectory on
your default drive to your eMS A-disk.
send c:subdirl pcfile.txt cmsfiie script al
(ascii crif)
This command sends a file named
PCFILE. TXT from a subdirectory named
SUBDIRI on your fixed disk (default drive) to
your VM host. It replaces a SCRIPT file,
named CMSFILE, on your CMS A-disk.
Sending Files Between a PC and a Host 7-9