7.15 Steam pipe and nozzle
To reach the steam nozzle or replace the steam pipe
•
Loosen the 4 casing fixing screws
•
Remove the entire casing
•
Loosen the 2 nozzle fixing screws and
remove it
WARNING
The seal is glued in place, so remember to order
a replacement seal before you remove the part.
If the fixing clip breaks during the casing removal
operations, it can be repaired by perforating the
casing and inserting a self-tapping screw; the back
panel already features a hole designed for this
purpose.
The same applies for the inspection cover
Technical Support - A.D.L.
42/69
599 76 86-51 Rev. 01