Door; Glass Door Handle, Latch And Hinge - Electrolux 599 76 86-51 Service Manual

Condensation tumble dryer with heat pump and steam generator
Table of Contents

Advertisement

7.9.1

Door

Remove the tumble dryer door as follows:
• Unscrew the 2 screws that hold the door to the
front.
• Lift up slightly so that the hook unhooks and
remove it.
Caution: the glass door weighs approximately
4.5 kg
7.9.2

Glass door handle, latch and hinge

• Unscrew the 4 perimetral screws that attach the
hinge unit to the door.
• Using a screwdriver and taking care not to
damage the frame, remove the whole hinge unit.
• Unscrew the remaining 8 screws that hold the frame to the door and remove it.
• Loosen the two screws securing the handle assembly and remove it by pushing it out
Technical Support - A.D.L.
36/69
599 76 86-51 Rev. 01

Advertisement

Table of Contents
loading

Table of Contents