7.26 Front air conduit
• Remove the frontal piece.
• Loosen the 13 screws securing the front air
conduit to the crossbars, to the tank support and
to the appliance base.
• Raise the two crossbars slightly so as to remove
them.
• Tilt the entire air conduit forward and lift it off.
7.27 Front air seal
Once the front air conduit has been removed, the air
seal can be removed.
• Raise the air seal to remove it completely
• When repositioning the front air seal, make sure
the joint is positioned as shown in the figure.
Technical Support - A.D.L.
50/69
599 76 86-51 Rev. 01