Steam Heated Dryers; Description; Overheating Thermostat - Electrolux T4900 Service Manual

Steam heated dryers

Description

Fig. 1 The steam calorifier A is located in
the steam heating unit at the top of the dryer
behind back plate A.
The air is drawn through the louvres on the
back plate and into the heating unit.
The heated air passes through the garments
and the drum vents.
Fig. 2 Then the air flows from the perforation
through the filter and via the outlet to the open
air.

Overheating thermostat

Also see section Sensors and overheating
thermostats.
Steam heated dryers are equipped with one
overheating thermostat in the outlet.
In the event of overheating, the dryer stops
and E08 flashes in the display.
Reset must be done manually but first the error
must be detected.
The following error code is related to this
section:
E 08 overheating
See Selecta Control service manual.
To be continued
70
Heating - steam
1
Inlet
Steam
Return
A
2
Service
manual