Condensation Water Pump - Electrolux 599 76 86-51 Service Manual

7.10.2

Condensation water pump

• Using pliers, loosen and raise the clamp securing
the supply pipe and raise it a few centimetres.
• Repeat the operation with the transparent pipe
(overflow return)
• Disconnect the 2 pump connectors and the level
sensor connector.
• Loosen the screw that holds the whole pump and
level sensor to the machine and remove it.
• Insert a screwdriver in the slots indicated by the
arrows and remove the pump by pushing it down.
Technical Support - A.D.L. 38/69 599 76 86-51 Rev. 01