Main Electronic Circuit Board; Control Panel - Electrolux 599 76 86-51 Service Manual

7.6 Main electronic circuit board

• Remove the worktop.
• Remove the right side panel.
• Disconnect all connectors, making a note of their
positions.
• Remove the two fastening screws from the
crossbar.
• Move the entire board assembly towards the
control panel so as to unhook and remove it.

7.7 Control panel

• Remove the worktop.
• Remove the tank.
• Loosen the three screws securing the control
panel to the uprights and air conduit.
• Loosen the 2 screws that secure the control
panel to the tank support.
• Turn it forward.
• Remove the wiring, making a note of the position
of the various connectors.
• Remove the entire control panel.
Technical Support - A.D.L. 34/69 599 76 86-51 Rev. 01